Descripción
ClearTop Epoxy + UV
This epoxy was designed with countertop artists who want a long-lasting, low yellowing, and clear finish. You can use this as an art epoxy, countertop epoxy and you can cast up to 1" deep on void fills!
BENEFITS & SAFETY
- New Non-Yellowing formula
- Roughly 45 minutes working time
- Recoat in as little as 5.5 hours!
- Minimal pitting, self levels like glass
- Tremendous bubble release and clarity
- Simple mixing instructions
- Versatile for use with colors
- Made in the U.S.A.
- Minimal torching required
- Recommended maximum shelf-life: 1 year in optimal conditions
SAFETY FIRST!
Resin is a blast to work with but remember you must ALWAYS wear a Niosh approved respirator, 5-9 ply nitrile gloves and eye protection when using ANY epoxy resin.
Important Shipping Info: We ship GROUND Continental U.S.only!
Please allow 3-5 business days for shipping after you have received notification that your order has been processed. We use impact resistant packaging to prevent shipping damages but we are not responsible for damage that occurs during shipping. We do not claim liability for acts or omissions of others. Please do not accept a damaged package. If you have received your package and it is damaged, immediately take pictures of the package and do not open the box/pallet until the company who delivered the package can send a representative to assess the damage and determine reimbursement (if any). If the package is leaking place it in a plastic bag or on a tarp to protect personal property from damage caused by a leaking package until a claim process has been filed and completed by the recipient.
Mixing Instructions
1. In a clean, marked mixing container pour: [one part] of ClearTop Epoxy + UV "Part B Hardener"
2. Add: [one part] of ClearTop Epoxy + UV "Part A Resin" and mix slowly for 5 minutes using a clean stir stick.
Note: Do not mix when the product and surface to be coated is below 70°F If the product is too cold or too hot (above 90°F, allow it to adjust to room temperature naturally and mix each part individually before use.
3. Pour into a second clean mixing container, add any desired pigments and mix for an additional 4 minutes.
4. Pour directly onto surface or in a shallow mold (under 1" deep).
5. Lightly torch or use a heat gun to remove bubbles.
6. Allow to dry for at least 24-36 hours before sanding.
DISCLAIMER
Any mixing instructions we provide are intended to instruct proper use of our products. This information is provided for informational purposes only. We do not oversee, train or otherwise take part in user-end application and therefore are not responsible for misuse or mishandlings of our products.