This Single-Channel Integrator is a self-contained, high quality UV measuring instrument. It is designed to measure, record and display key values in the UV curing process, like: Peak UV intensity, UV dosage and optionally curing chamber Temperature. With UV and temperature measuring (option), most of the measuring requirements of UV curing applications are covered. This instrument can measure, record and display the peak UV-intensity of the total UV spectrum (mW/cm2). Additionally, UV-dosage is calculated (mJ/cm2,) based onthe UV energy supplied during the the measuring cycle. The UV-dosage is calculated as the total Integral of UV-dosage over the full UV spectral bands. This instrument features a selectable ãtriggered modeÒ, i.e. the 30 sec recording cycle starts within a 120 second readiness phase not before the incident UV-intensity exceeds 2 mW/cm². The sensors is on the back of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in LCD display. Options: A) This instruments is also available with a SD-Memory Card Slot. Measurements can be stored and downloaded to a computer for further evaluation. The included software allows to show, edit and store a history of the measuring results of the entire measuring cycle as graphic and numeric charts. (mW/cm2 and mJ cm2 and °C/°F if equipped with a temperature sensor) B) Also available is a Temperature Sensor with a measuring range of 32 to 230º F or 0 to 110º C. A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life.
|
| ||||||
| 1-Channel Integrator without SD-Card Slot | | | 1-Channel Integrator with SD-Card Slot | ||
| ||||||
| ||||||
| 1-Channel Integrator and Temperature without SD-Card Slot | | | 1-Channel Integrator and Temperature with SD-Card Slot | ||
|