Due to its four UV sensors and the integrated microprocessor the UV-4C can measure, record and display the peak of the UV-energy (mW/cm2) for each UV-band individually plus the peak of total UV energy. Additionally, this UV Integrator is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during a measuring cycle. The UV-dosage is calculated for each UV-band (UV-A, UV- B, UV-C and UV-V) individually and as total Integral of UV-dosage over all three UV-bands. This allows to determine not only the total energy, but also how that energy is delivered, i.e.,what intensity and dose at what UV-band. The four sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in 2 x 16 digit LCD display. This instrument features a selectable ãtriggered modeÒ, i.e. the 30 sec recording cycle starts within a 120 second readiness phase not before the incident UV-intensity exceeds 2 mW/cm². The sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in 2 x 16 digit LCD display. Options: This instruments is also available with a SD-Memory Card Slot. Measurements can be stored and cdownloaded to a computer for further evaluation. The included software allows to show, edit and store a history of the measuring results of the entire measuring cycle as graphic and numeric charts. (mW/cm2 and mJ cm2) A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life.
|
| ||||||
| UV-4C Integrator UV-A, B, C & V without SD-Card Slot Item# 681060 $3,195.00 | | | UV-4C SD Integrator UV-A, B, C & V with SD-Card Slot Item# 681200 $3,630.00 | ||
|