Qwik Pro FSUVA-500
- Blanket and roller wash for Conventional, Hybrid and UV Inks
Description:
UVA-500 is a
special blend of solvents designed to work on ultraviolet, electron
beam and hybrid cure inks. It contains no aliphatic or aromatic
hydrocarbons and is nondamaging to EPDM rollers. It is also compatible
with hybrid composite and buna-nitrile roller compounds. Directions:
Blankets:
Apply UVA-500 with a rag, and wipe in a back and forth motion. Wipe
clean with a dry rag. Rollers:
Apply UVA-500 to the top rollers in the roller train. Allow to run for
one minute. Engage wash-up blade and apply additional portions until
rollers are clean. If rollers slip, apply wash to one side of the
rollers at a time. Product
Need and Usage: Many presses
that are configured to run UV and EB cure inks are equipped with EPDM
rubber compounds that are chemically-resistant to the chemistry in the
inks, but are adversely affected by conventional hydrocarbon-based
blanket and roller washes. These rollers require special solvents in
order to effectively clean the ink, but not damage the rollers. UVA-500
has the added benefit of being compatible with conventional non-UV
rollers as well. This is beneficial for shops that may be running UV on
both kinds of rollers. Application: Manual
and automatic wash-up application Features:
Non-damaging
to EPDM rubber.
Controlled drying for
effective cleaning.
Combustible flash
point.
Technical
Specifications:
Drying
Speed: Medium
Water-Miscible: Yes
Flash Point (° F
TCC): 110
VOC (lb/gal method
24): 7.30
Vapor Pressure (mm
HG): 9
Odor/Fragrance:
Strong / Citrus
Disclaimer: Unless
otherwise restricted by applicable law, nothing contained in this
literature shall be deemed a representation or warranty of any kind,
either expressed or implied. See the Material Safety Data Sheets (MSDS)
for this product for safety information prior to use.